| Description | Features | Specifications | Electroline Advantage | PDF Fact Sheet |

EDA-EQ 3100 Drop Amplifier Specifications*

EDAICF power inserter (optional)

110 or 220 VAC PTC protected wall adapter included in EDA-EQ kit

Forward Passband		54-1000 MHz
Return Passband		5-42 MHz
Forward Gain	54 MHz 1000 MHz	7 dB 14 dB
Return Path Insertion Loss		0.5 dB
Flatness		± 1 dB
Return Loss (all ports)		20 dB
Distortions	Composite Second Order1 Composite Triple Beat1 Cross-modulation1	-62 dBc(max.) -74 dBc(max.) -75 dBc(max.)
Noise Figure		3 dB
Forward Band Group Delay (3.58 MHz span)	Channel 2 Channel 3 Other channels	20 ns (max.) 10 ns (max.) 5 ns (max.)
Reverse Band Group Delay (1 MHz span)	5-42 MHz 10-36 MHz	20 ns (max.) 5 ns (max.)
Hum Modulation		-70 dBc
RFI Isolation		100 dB (min.)
PWR to RF IN Isolation		100 dB (min.)
Surge Protection		6 kV (all ports) C62.41-1991 ring wave, loc.A3
Recommended Wall Adapter Output Rating		15 VDC 270-300 mA , PTC short-circuit protection
Operational Temperature Range		-40°C to +60°C
F connectors		SCTE IPS-SP-400, water sealed

¹Input levels at +10 dBmV flat 77 channels, and 200 MHz of broadband noise from 590 to 790 MHz at 6 dB below video carrier.

*Specifications are subject to change without notice.

Drop Amplifier (EDA) - Return Path Amplifier (ERA)
EDA-UG - EDA-EQ 3100 - EDA Flat-Top

Addressable Products - Return Path Products - Amplifiers - Line Passives
RF Signal Management - Network Status Monitoring Transponders