|
Electroline is offering a new HMS Transponder with Embedded DOCSIS® Modem (DHT) technology for managing, monitoring and controlling HFC network devices. Transponders are installed into HFC equipment such as standby power supplies , fiber nodes, and optical amplifiers, and also can be implemented as stand-alone independent network test points (or otherwise known as end of line monitors). The power inherent in the DOCSIS® technology also enables device transponders (for example a standby power supply transponder) to also report and alarm on VoIP service and RF network RF network performance. Electroline transponders offer substantially more valued and features than just monitoring of the device it is installed in.
Electroline's transponder product is based on three standards:
- DOCSIS® for the PHY and MAC layer protocol;
SNMP;
- SCTE HMS.
Never before have these standards been integrated together. The combination of these standards forms a technology that provides a significant advantage over the more traditional proprietary and evolving HMS transponders.
Transponders enable the communications of status and performance indicators from devices in the outside plant portion of an HFC subscriber access network. Furthermore, a transponder can receive instructions for the control of functionality in the devices in which it is installed. Devices not having transponders cannot report critical information needed for management back to a remote or centralized manager. Likewise, the devices without transponders cannot hear instructions from the manager and react as instructed.
Click here to download Fact Sheet.
Electroline Cable Modem Module (ECMM)
 About the size of a business card, the ELECTROLINE Cable Modem Module (ECMM) is probabaly the smallest cable modem in its class. It is temperature hardened for integration in OEM product that is required to operate in the outdoor or extreme temperature environment. Typical cable modems are designed to work on desk tops, indoors and were not designed to operate under extreme conditions.
The ECMM enables various applications requiring communications to remote locations to backhaul or connect using the Cable TV and broadband infrastructure that applies Hybrid Fiber and Coaxial (HFC) or Fiber to the Home (FTTH) technologies in the access network.
Click HERE to download a fact sheet
Electroline Management Information Base Objects (MIBs)
Electroline Management Information Base objects (MIBs) used in conjunction with our Network Status Monitoring Transponder line of products can be obtained from Technical Support at (514) 374-6335.
HMS Power Supply Transponder with Embedded DOCSIS® Modem (DHT-PS)
Click image to enlarge (1600x1200)
 Electroline's DHT-PS Transponder interfaces with a standby power supply. Available in DOCSIS ® –EuroDOCSIS versions, it provides the communication channel, using the HFC cable network, between the remotely located power supplies and a computer running the Network Management Software.
The
The DHT-PS Transponder is not a typical power supply transponder. It implements DOCSIS® cable modem technology in its physical media interface to the network, specifically the Physical (PHY) and Media Access Control (MAC) layer protocol. This is achieved with standard, readily available DOCSIS® integrated circuits. 
Click here to Download Fact Sheet.
HMS Transponder Plug-in Card fits inside a standby power supply Manufactured by Alpha Technologies Inc
Click image to enlarge (1600x1200)
The models DHT-PS-AT-03 and DHT-PS-AT-07 are hybrid HMS and DOCSIS®–EuroDOCSIS status monitoring transponders, designed to install inside of Alpha* XM2 power supplies. Like all of Electroline’s transponders, these embedded versions offer the same ruggedness and standards compliance that operators require.
Click here to Download Fact Sheet.
E-Line Monitor DOCSIS® based HFC Line Monitoring
Click image to enlarge (800x600)
 Electroline's DLM-01 and DLM-03 implement the temperature hardened monitoring capabilities of DOCSIS®-based HMS status monitoring transponders with service and network performance assurance functionality. These units are stand-alone, strand or pedestal mount, weather proof, and line powered. They are in constant communication with standards based Network Management Systems (NMS) and generate alarms when preprogrammed performance thresholds are breached.
Click here to Download Fact Sheet.
ENetToolBoxTM Enhanced Network Monitoring From Electroline
Click image to enlarge (800x200)
The ENetToolBoxTM is a powerful Web 
server and test stream generator. Using the ENETToolBoxTM combined with the ENetMonitorTM system you have an intelligent, user-customizable tools for testing a host of parameters. This unit drives
the ENetMonitorTM capabilities loaded
into
Electroline's DOCSIS®-based transponders
and
modems.
Click here to Download Fact Sheet.
ENetMonitor VoIP and RF performance monitoring for Power Supply Transponders and temperature hardened cable modems
Click image to enlarge (800x600)
 The ELECTROLINE based technology has enabled new added value for the HFC network operator. The status monitoring transponders are DOCSIS based (DHT series), rugged, and temperature hardened. Our DHT transponder and “hardened” cable modems (DRM series) can be purchased with, or download later with added the functionality that ENetMonitor provides. The functions are designed for monitoring the transmission performance of the HFC network or the QOS performance of data, VoIP and other services being carried to the subscribers by the network.
Click here to Download Fact Sheet.
For further
information,
contact Electroline's Sales & Marketing Department:
|
Overview
